Technical data
| Parameters | К10.3.18.01 | К10.3.18.02 | К10.3.32.05 |
| Nominal effort, kN | 63,0 | 63,0 | 1600 |
| Bale dimensions, mm |
B x H x L 400x400x350 |
B x H x L 400x500x200-600 | B x H x L 1100х720х1700 |
| Dimensions of charging opening, mm | B x L 400 x 500 |
B x L 500 x 560 |
B x L 1100 x 1700 |
| Max, volume of charging, m3 | 0,19 | 0.24 | 3 |
| Time of baling cycle (upstroke and downstroke of the ram without accounting the time of charging and strapping) sec., not over | 120 | 30 | 30 |
| Mass of bale, kg, not over | 20 - 40* | 20 - 50 | 1200 - 2000 |
| Strapping (wires number and their diameter, pcs/d), mm | 2/2 | 2/2 | 5/3 |
| Output (at raw material density: K10.3.18.01 - 01 t/m3; К10.3.32.05 - 0,2 t/m3), t/h | 0,2 - 0,5 | 1,5 | 25 |
| Method of bale strapping | manual | manual | automatic |
| Electromotor power, kW (for K10.3.32.05 - 5 pcs) | 4 | 1,5 | 108 |
| Overall dimensions of press, mm - length - width - height |
1100 800 2750 |
610 900 2700 |
12500 |
| Mass of press, t | 0,62 | 0,6 | 39 |
* - mass of bale depends on the desity of material to be pressed and height of bale.
| To improve the consumers' parameters of equipment
OJSC "Donpressmash" reserves the right to introduce technical and design amendments. |
 |
 |
  |
Copyright © 2000 Donpressmash. All Rights Reserved |