Technical data
| Parameters | Value | |
| H2732 | H2735 | |
| Nominal effort of cutting on the inner end of blade, kN | 1600 | 3150 |
| Max. dimensions of cross-section of the metal to be cut, mm - round (diameter) - strip (width, thickness) |
70 600 x 10 |
100 750 x 16 |
| Frequency of blade continuous strokes, min-1 - min - max |
15 45 |
12 40 |
| Time of cutting cycle of max. cross-sections, sec., not over | 6 | 6,5 |
| Length of blades, mm, not less | 630 | 800 |
| Shears throat, mm | 60 - 240 | 75 - 300 |
| Power consumption, kW | 18,5 | 36 |
| Length with clamping guard, mm | 4540 | 5800 |
| Width, mm | 1220 | 2400 |
| Height, mm | 1900 | 1720 |
| Mass, mm | 5460 | 13400 |
| To improve the consumers' parameters of equipment
OJSC "Donpressmash" reserves the right to introduce technical and design amendments. |
 |
 |
  |
Copyright © 2000 Donpressmash. All Rights Reserved |